Veeder Root Annular Sensor
Veeder Root Annular Sensor. The microsensor is an optical, solid state sensor that requires no moving parts. To ensure proper operation of these sensors.
![NonDiscriminating Interstitial Sensor for DoubleWall](https://i2.wp.com/www.veeder.com/us/sites/veeder.com.us/files/2018-12/vr_na_-_sensors-scr_10.png)
Instructions for completing the sensor’s installation are discussed in the manual shipped with the sensor. Measure the length of the riser pipe as shown in figure 1. Ad all information contained in this document is subject to change without notice.
Make Sure No Liquid Is Present In The Annular Space.
You’ll know immediately where the problem is so you can take swift action to prevent serious and costly safety and. To acknowledge warning and alarms: The front panel warning and alarm leds cannot be turned off until the cause of the condition has been rectified.
A All Information Contained In This Document Is Subject To Change Without Notice.
Locate the label on the sensor cable that corresponds to the tank. Measure the length of the riser pipe as shown in figure 1. When liquid is detected, the sensor sends an alarm signal to.
Liquid Triggers An Alarm Signal To Your Automatic Tank Gauge.
To ensure proper operation of these sensors. Instructions for completing the sensor’s installation are discussed in the manual shipped with the sensor. Learn more about veeder root sensor testing, tank monitor sump sensors, leak detection probes, line leak detectors, in our commtank article, ust leak detection systems annual inspection requirements.
Ad All Information Contained In This Document Is Subject To Change Without Notice.
Compatible with gasoline, diesel, kerosene, jet fuel, aviation gas, waste oil, motor oil, gasoline with up to 15%. Failure to remove any liquid in the annular space will lead to an alarm. You’ll know immediately where the problem is so you can take action to prevent serious and costly safety and environmental problems.
Types Of Interstitial Tank Sensors
Annular space monitoring well oil/water separator tank discriminating. This bell sensor consists of a metal housing shaped like a bell with a float that slides up and down on a rod. Designed for smaller spaces the micro sensor is just 2” long and 0.63” in diameter.
Post a Comment for "Veeder Root Annular Sensor"