Intake Manifold Runner Position Sensor 2008 Dodge Avenger
Intake Manifold Runner Position Sensor 2008 Dodge Avenger. There is a factory service bulletin for the following dodge models: New manifold position sensor, new oem throttle body.
I have an 08 avenger with the 2.4l. The intake manifold distributes air from the throttle body to the individual cylinders to be mixed with fuel and ignited. The ecm sets the obdii code when the intake manifold runner position sensor/switch is not to factory specifications.
This Can Be Caused By A Stuck Intake Manifold Butterfly Valves, Perhaps Due To Carbon Buildup, A Failed Butterfly Valve Actuator / Motor, Or A Faulty Position Sensor.
Video of removed intake manifold and runner valve There is 2 bolts on top 1 top outer and 1 top front behind grill, u need to remove the top center black cover and 1 bottom side outer need to remove the inner finder liner to get to the 3rd bolt. After much research i found that code reads to be intake manifold runner postion sensor high.
However, Attempting To Drive Down The Highway Is Almost Impossible.
Dodge avenger 3.5l 2009, intake manifold flap motor by dorman®. The engine control module monitors the intake manifold runner position sensor/switch. The runner valve controls a flap in the intake manifold, which will open or close depending on the air requirements of the engine.
The Car Lacks Power During Acceleration.
Took off manifold and cleaned runners. The runner position sensor, also known as the runner valve, controls the volume of air entering the intake manifold. The opening of these valves are controlled by an electronic module located.
Each Passage Of The Intake Manifold Is Called A Runner, And In Modern Vehicles, The Runner Can Be Adjustable, Controlled By A Valve.
Parts fit for the following vehicle options. Intake manifold w/ runner control valve & sensor fits jeep patriot compass 2.4l (fits: I hate to disagree with mr.
08 Dodge Avenger 4 Cyl 2.4 Cu In Automatic, Obd Codes 2004 & 2017.
This product is designed and tested to ensure the ultimate in durability and functionality. It's a lot cheaper and easier to get the actuator module. Howdy folks, keeping this brief, my daugters avenger (2.4) pop up a p2007 code causing it to fail the yearly texas inspection test.
Post a Comment for "Intake Manifold Runner Position Sensor 2008 Dodge Avenger"