Clean Flame Sensor Amana Furnace
Clean Flame Sensor Amana Furnace. You may need to replace the sensor, in which case you can follow these same instructions with the exception that no sanding is involved; Goodman and amana furnaces are manufactured at the s.
When cleaning the flame sensor, do not be too aggressive as this can shorten its lifespan. The good news is that cleaning a furnace flame sensor is very easy. Clean away soot and corrosion using dry, clean paper towel;
Once Inside The Burner Area, The Flame Sensor Is A Thin Metal Rod With A White Porcelain Base.
If it is either defective or dirty, it will not be able to detect a flame. When a new sensor is installed it tests around 3ua. It's usually bent, and it.
Clean Away Soot And Corrosion Using Dry, Clean Paper Towel;
Do not use sandpaper on any other component in your furnace. It's located on the burner assembly and is just a thin metallic rod. I took it out and sanded it to clean it, but i'm still having pr.
It Will Likely Have One Screw Holding It On, You Can Remove It And Clean It With Steel Wool Or Scotchbrite.
This is to get rid of the buildup on the sensor. Not heating how to fix a goodman/amana or any furnace with. If the flame sensor does not detect a flame, the control board will shut off voltage to the gas valve to prevent the furnace from heating.
The Flame Sensor Monitors The Burner To Detect Whether Or Not A Flame Is Present.
You may need to unscrew a few screws. If faulty, replace the flame sensor. To do that, you can follow these same process.
If Faulty, Replace The Flame Sensor.
Replaced the control board as well. Once you remove the flame sensor rod, use an abrasive material such as very fine sandpaper to clean off any debris and caking off the flame sensor’s head. Sometimes, if the flame sensor is dirty, it will fail to detect a flame.
Post a Comment for "Clean Flame Sensor Amana Furnace"