How To Clean My Furnace Flame Sensor
How To Clean My Furnace Flame Sensor. The flame sensor is just a way of exposing the voltage on the. Reattach the cleaned or new flame sensor, screw on the furnace cover, and you are ready to go.
The good news is that cleaning a furnace flame sensor is very easy. Rub the metal part (and no. 3.) sanitize the flame sensor.
Rub The Metal Part (And No.
However, if you can’t find your user guide, we recommend cleaning with a soft steel wool or scotch brie pad. Rub the probe with emery cloth or fine steel wool to remove carbon deposits. What can i use the clean the furnace flame sensor?
After Knowing The Location Of The Flame Sensor, Now Is The Time For You To Start The Cleaning Process.
Simply shut off the power to the furnace, remove the flame sensor, clean it, and put it back. Once you have removed the sensor, gently rub the metal rod (only) with soft steel wool or soft scotch brie type pad never use sandpaper as it will damage the flame rod. Before you begin the flame sensor cleaning process, turn the gas and electricity off to the unit.
Fortunately, It’s Just Dirt Buildup That You Can Remove With Simple Wiping Most Of The Time.
Clean the sensor with an emery cloth; Turn off the gas valve; Small piece of light grit sandpaper, steel wool, or emery cloth;
With That Done, Your Sensor Should Begin To Work Normally Again.
4.) replace and reconnect the sensor The good news is that cleaning a furnace flame sensor is very easy. When the burner’s flames are lit, the grooves of the flame sensor can accumulate carbon.
Remove This Screw And Slide The Sensor Out Gently.
The process of cleaning the flame sensor is easy. The process of cleaning a furnace flame sensor. Shut off power and gas to the furnace;
Post a Comment for "How To Clean My Furnace Flame Sensor"