Hunter Sprinkler Rain Sensor Not Working
Hunter Sprinkler Rain Sensor Not Working. Hunter hc flow meter 1 in. Then you should reverse the conditions to get the opposite reading.
In that accumulation time, the system will unnecessarily continue to water. Troubleshoot the system if is it does not stop watering when you depress the plunger on the rain sensor. Hunter hc flow meter 1 in.
The Most Common Reason Is Because The Sensor Has Not Received Enough Rain To Activate.
To fix this, slide the switch into the “active” position. Even though the sensors will turn on when the rain starts, this unit will remain engaged until the issue has been resolved. Why is my rain sensor not working?
The Bypass Status Light Will Turn Red When The Sensor Is Bypassed.
They have a series of porous cork discs that when they get wet from rain, they expand and force the sensor to prevent the controller from watering. If really wet you should get an open circuit. We recently purchased a new home with a hunter pro c controller on the irrigation system.
I Faced Similar Sorts Of Problems And Got Worried When My Hunter Sprinkler System Stopped Working.
Release the button and the zone should come back on. Do you hear it click? Press and hold down the button on top of the sensor.
Hunter Wsssen Wireless Solar Sync Sensor And Receiver Only.
To bypass the sensor, press the sensor bypass button on the receiver. Hunter wireless rain sensor troubleshooting: During the manual all stations cycle, press the test button on the “clik.
Go Out To The Rain Sensor And Manually Activate The Switch.
If the system does not shut off. If the system does not shut off or come back on, check for wiring problems. If playback doesn't begin shortly, try.
Post a Comment for "Hunter Sprinkler Rain Sensor Not Working"