Note 10 Plus Proximity Sensor Test
Note 10 Plus Proximity Sensor Test. When i am on call, the display turns off as soon as it gets close to the ear, but then as soon as the call is finished the screen remains closed as if it were still on call and i have to touch the screen to reactivate it. Your can test sensors in your smartphone.
Float this item to the top. Now, tap on the sensor button to access the diagnostic page. Check your proximity sensor with proximity sensor test 2 (play store).
Using These Codes, You Can Enter Samsung Engineering Mode, Test The Network, Diagnose The Hardware And Get Key Information About Your Samsung Phone To Galaxy Tab.
You can't turn it on and keep it on. When i am on call, the display turns off as soon as it gets close to the ear, but then as soon as the call is finished the screen remains closed as if it were still on call and i have to touch the screen to reactivate it. Also this could be caused due to any video calling app, try resetting those app as well
Expandable Storage Via Microsd Card Up To 1000Gb.
At this point we cover the ear capsule and see if the number gives 0 and 5 as a digit. I tested the proximity sensor by accessing the test suite through a special code in the phone dialer. Here is how to turn on and test the proximity sensor.
In Case Of Android, Do Following To Test The Proximity Sensor:
This will yield a test page for a variety of sensors — namely the accelerometer, proximity sensor, barometer, light sensor, gyroscope, magnetic sensor, hrm, and fingerprint scanner. The first thing to do is to test if the proximity sensor if not faulty and is in working condition. Dial *#77692# you wil get two sensors to test:
Upon Further Discover, We Found Out That This Blinking Light Is The Proximity Sensor.
No problem at all in oneplus nord with the proximity sensor with firmware oxygenos 10.5.10 (12.2020) and earlier versions. Tap turn off screen during calls to enable or disable. The phone screen is accidentally turning on during the calls, when the phone is on your ear/face/.
We Just Can Test It By Turning It On Afterward It Goes To Off Modus.
26% higher pixel density (495 vs 393 ppi) has 50% more ram: The proximity sensor detects when a user is holding the phone near their face during a call and turns off the display to prevent keypad presses and battery consumption from the display. Though, this light only appears when we were calling people.
Post a Comment for "Note 10 Plus Proximity Sensor Test"